Original
By certification 
If you are looking for China golden supplier and China good supplier polyken polyethylene pipeline tape, good quality and high quality polyken polyethylene pipeline tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
product description:
Polyethylene pipeline tape is my company in the traditional polyethylene anti-corrosion tape on the basis of the development of a new type of anti-freeze tape. The substrate is a high and low density polyethylene film, while the adhesive layer is a high viscosity thermoplastic modified butyl sticker anticorrosive adhesive. The utility model can be widely applied to the external anticorrosion and repair work of oil and gas, chemical industry, urban construction, water supply, drainage, oil and gas, gas pipeline and steel storage tank. It is a pollution-free, pollution-free new environmentally friendly materials, has the following advantages:
1, strong viscosity, can be achieved from the melt, waterproof, breathable, good sealing.
2, high electrical insulation, excellent anti-aging, anti-ultraviolet strong.
3, with resistance to soil stress damage ability, impact resistance.
4, single-layer tape winding can be achieved SY / T0414-2007 standard requirements in general or enhanced anti-corrosion. The utility model has the advantages that the traditional tape needs to be wound in a plurality of layers, and the influence of the human factors on the quality of the corrosion is reduced and the construction cost is reduced.
5, construction is simple, fast, no curing time, manual, mechanical operation can shorten the construction period.
6, low cost, no pollution, waste three.
System Description
The POLYKEN 980 Cold Applied Tape for pipeline coating is suitable to any diameters for petroleum, natural gas, water supply, city gas, oil and electric power industries etc. the systems are inner wrap tape and outer wrap tape, primer and Putty.
Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Structure
Backing : Special blend of stabilized polyethylene | |
Adhesive : Butyl rubber and Adhesion Promoting Resins |
|
Color: Black |
|
Properties
Product Properties |
Test method |
Typical Value |
|||
POLYKEN980-15 |
POLYKEN980-20 |
POLYKEN980-25 |
POLYKEN980-30 |
||
Total Thickness |
15mil(0.381mm) |
20mil(0.508mm) |
25mil(0.635mm) |
30mil(0.762mm) |
|
Backing of PE film |
9 mils(0.229 mm) |
12mil(0.305mm) |
13mil(0.330mm) |
10mil(0.254mm) |
|
Butyl Rubber Adhesive |
6 mils(0.152 mm) |
8mil(0.203mm) |
12mil(0.305mm) |
20mil(0.508mm) |
|
Tensile Strength |
ASTM D1000 |
40 N/cm |
55 N/cm |
62 N/cm |
70 N/cm |
Elongation |
ASTM D1000 |
300% |
330% |
350% |
400% |
Peel Adhesion to Primed Steel |
ASTM D1000 |
24.5 N/cm |
25 N/cm |
26.5 N/cm |
30 N/cm |
Water Vapor Transmission Rate |
ASTM E 96 |
0.10g/m2 |
0.10g/m2 |
0.09g/m2 |
0.08g/m2 |
Water absorption after 1 day,At+23℃ |
ASTM D570 |
0.10% |
0.10% |
0. 08% |
0. 06% |
Volume Resistivity |
ASTM D 257 |
2.0 x 1015 ohm.cm |
2.5 x 1015 ohm.cm |
2.5 x 1015 ohm.cm |
|
Dielectric Strength |
ASTM D149 |
30 kV |
35 kV |
42kv |
43kv |
Ordering Information
Eg.: POLYKEN980-20 BLK 6"×400'
POLYKEN 980 |
Product Model No. |
Standard ordering options |
20 |
Total tape thickness in mils |
15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) |
BLK |
Tape backing color |
Black (BLK) |
6 |
Tape width in inches |
2"(50mm),,4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) |
400 |
Tape roll length in feet |
100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) |
