Nylon plastic bushing polymer bushing nylon bushing PA66 nylon
High strength glass fiber with epoxy resin baked with PTFE and special fiber as bearing lining, the back material provides high load capacity and bearing lining offers low fricition under dry condition. Therefore, this special structure offered an ourstanding anti-wear feature and anti-impact performance, suitable for high load with high corrosion resistance application like lifting machinery, logistic machinery, agricultural machinery, and port machinery etc.
High strength glass fiber with epoxy resin baked with PTFE and special fiber as bearing lining, the back material provides high load capacity and bearing lining offers low fricition under dry condition. Therefore, this special structure offered an ourstanding anti-wear feature and anti-impact performance, suitable for high load with high corrosion resistance application like lifting machinery, logistic machinery, agricultural machinery, and port machinery etc.
Technical description |
Unit |
||||||
Basic type |
General |
Standard |
High load |
High speed |
Underwater |
Muti-use |
|
Density |
g/cm3 |
2.00 |
2.00 |
2.00 |
2.00 |
2.00 |
1.30 |
Max. PV |
N/mm2×m/s |
1.8 |
1.8 |
2.0 |
1.6 |
1.8 |
1.2 |
Coefficient of friction |
0.05~0.15 |
0.03~0.12 |
0.03~0.12 |
0.02~0.12 |
0.02~0.10 |
0.08~0.30 |
|
Working Temp. |
℃ |
-100~+160 |
-100~+160 |
-196~+200 |
-100~+160 |
-100~+100 |
-40~+130 |
Max. speed |
m/s |
0.20 |
0.20 |
0.20 |
0.40 |
0.40 |
0.13 |
Max. compressive strength |
MPa |
420 |
420 |
550 |
420 |
420 |
300 |
Static load |
MPa |
240 |
240 |
260 |
240 |
240 |
100 |
Dynamic load |
MPa |
100 |
140 |
160 |
30 |
100 |
45 |
Shore hardness |
D |
95 |
95 |
95 |
95 |
95 |
90 |
Linear coef. of thermal Expansion |
10-6×K-1 |
13 |
13 |
13 |
13 |
13 |
40 |
Thermal conductivity |
W/m.k |
0.26 |
0.26 |
0.26 |
0.26 |
0.26 |
0.16 |
Max. water-absorption rate23℃ |
% |
0.16 |
0.16 |
0.16 |
0.16 |
0.16 |
0.20 |
color |
blue |
coffee |
Black |
Ivory-white |
Green |
Dark gray |
Bearing friction coefficient
Filament wound bearing’s coefficient of friction is 0.03~0.12. The load, movement mode, speed and surface roughness of the axle will effect the wear of bearing. Figure 1 shows that the coefficient of friction of the wound bearing under the PV rotation load decreases as the load increases.
Bearing Spec.:CRB-6070-50 axle:45# HRC50,Ra=0.4
Load:20~140MPa
Speed:1.0m/min
Lubrication:干
Dick Precision Mechinery, established in 2010, is a professional nylon plastic bushing polymer bushing nylon bushing pa66 nylon manufacturers and suppliers in China, offering customers the best quality products and excellent service. In order to make customers satisfied, customized orders of products are also welcome in our factory.